Portfolio

Hardware we've taken from schematic to shipped batch.

A sample of recent boards — industrial networking, wearables, power electronics and flight control — each engineered, prototyped and documented in-house.

Get a quote

Networking

Industrial Ethernet switch

An L2/L3 platform on a Microchip VSC7558 SparX-5-200 switching fabric: 48 copper ports, 4× SFP28 uplinks and an onboard management core. Built from architecture and schematic through a 10-layer board, bring-up, testing and a production package — four weeks from concept to a batch-ready device.

Switch fabricVSC7558 SparX-5-200, 200 Gbps
Ports48× RJ45 + 4× SFP28 (25G)
PCB10-layer, KiCad, controlled impedance

Wearables

GLASSES — smart-glasses board

A ~58×15 mm electronic module built to fit inside a glasses temple: ESP32-P4 application processor, a separate ESP32-C6 radio module, a camera interface, a Class D audio path with digital mic, dual independent storage, an external-display connector and a full Li-Ion charge and power system.

ProcessorESP32-P4 (QFN-104)
RadioESP32-C6-MINI, Wi-Fi + BLE + 802.15.4
Size≈58 × 15 mm

Power electronics

6 kW power factor corrector

A 6 kW power factor correction stage that shapes the mains current into a sine wave in phase with voltage, cutting the reactive and harmonic load on the supply and delivering stable input power to downstream equipment. Scope covered topology selection, power-stage and driver schematics, the control loop, PCB and thermal design.

Power6 kW
FunctionPFC + charge stage
ScopeTopology → schematic → PCB → thermal

Compute module

SOM-3566-LGA-RU

A Rockchip RK3566 compute-on-module in an LGA package — processor, RAM and boot memory on a 45×45 mm footprint, mounted directly onto the host board with no connector in between. A ready engineering foundation for HMIs, industrial controllers, IoT gateways and serial production, with Linux and Android BSPs.

SoCRockchip RK3566, 4× Cortex-A55
PackageLGA, 45 × 45 × 3 mm
OSLinux / Android BSP

Flight control

BERKUT F405 V1 flight controller

A flexible F4-class flight controller built for anything from a quadcopter to an X8. Dual IMU for onboard redundancy, up to 32 MB of blackbox logging and six UARTs — a clear step up from the base HAKRC F405 board it was benchmarked against.

MCUSTM32F405RGT6
IMUMPU6500/6000 + ICM42688 (dual)
FirmwareBetaflight 4.3.2

Start a project

Tell us what you want to build.

Write in the messenger you like — a few lines are enough. We reply with questions and a clear quote.

Write to us directly